Note: Place the motorcycle on a suitable stand. Make sure that the motorcycle is upright.
2. Let the engine idle for a few minutes.
3. Check: engine oil level
The engine oil level should be between the minimum level marks (a) and maximum level marks (b).
Below the minimum level mark → Add the recommended engine oil to the proper level.
Recommended engine oil: Refer to the chart for the engine oil grade which is best suited for certain atmospheric temperatures.
- API standard: SE or higher grade
- ACEA standard: G4 or G5
Caution!
- Engine oil also lubricates the clutch and the wrong oil types or additives could cause clutch slippage. Therefore, do not add any chemical additives or use engine oils with a grade of CD (a) or higher and do not use oils labeled "ENERGY CONSERVING II" (b) or higher.
- Do not allow foreign materials to enter the crankcase.
4. Start the engine, warm it up for several minutes, and then turn it off.
5. Check the engine oil level again.
Note: Before checking the engine oil level, wait a few minutes until the oil has settled.