![](https://motoinstruction.ru/img/yamaha/16/122159.jpg)
Order | Job name/Part name | Quantity | Remarks |
Fuel tank and seats removal | Remove the parts in the order below. | ||
1 | Passenger seat | 1 | |
2 | Seat bracket | 1 | |
3 | Rider's seat | 1 | |
4 | Fuel hose | 1 | Note: Set the fuel cock to "OFF" before disconnecting the fuel hose. |
5 | Ignitor plate | 1 | |
6 | Mud guard | 1 | |
7 | Meter lead couper | 1 | |
8 | Fuel tank assembly | 1 | For installation, reverse the removal procedure. |
Removal
1. Remove: Ignitor plate
Note: To remove the quick fastener, push its center in with a screwdriver, then pull the fastener out.
![]() | ![]() |
Installation
1. Install: Ignitor plate
Note: To install the quick fastener, push its pin so that it protrudes from the fastener head, then insert the fastener into the cowling and push the pin (a) in with a screwdriver. Make sure that the pin is flush with the fastener's head.
![]() | ![]() |