1. Start the engine and let it idle for 3-5 minutes. Make sure the low oil pressure indicator is (Red) went out. If the light remains on, stop the engine immediately.
2. Stop the engine and keep the motorcycle upright on firm, level ground.
3. After 2-3 minutes, unscrew the oil filler cap, wipe it dry with a rag and reinsert it into the neck without screwing it in. The oil level should be between the upper and lower level marks on the dipstick.
4. If necessary, add engine oil with the recommended specifications (see here) to the top mark. Avoid overfilling.
5. Reinstall and tighten the oil filler cap tightly. Check for oil leaks.
Note. Operating the engine with insufficient engine oil pressure can cause serious engine damage.
![](https://motoinstruction.ru/img/honda/9/115358.jpg)
(1) Maximum level mark; (2) Minimum level mark; (3) Oil filler cap