- Remove left side section of fairing.
See Group 46.
- Remove upper section of fairing.
- Carefully pull Bowden cable at sleeve (1) and remove insert (2).
- Disconnect bayonet-type plug (arrow) of control unit.
- Pull Bowden cable away from control unit until approx. 1 cm (0.4 in) of cable is visible and secure Bowden cable in this position with clamp (arrow).
- Disengage nipple (3), move Bowden cable with clamp clear.
- Disconnect plug (arrow).
- Remove screws (4) securing retaining plate to fairing bracket.
- Remove retaining plate with control unit for cruise control system.
- Remove screws (5) and remove control unit.
- Installation is the reverse of the removal procedure.
Tightening torques:
- Retaining plate to fairing bracket — 8 Nm