Vertical adjustment
- Set suspension preload to "LOW" (turn counterclockwise).
Note: Make sure that the adjuster on the instrument-panel cover is at the "UP" position (turned counter-clockwise as far as it will go).
- If necessary, turn the adjuster on the instrumentpanel cover counter-clockwise as far as it will go.
![](https://motoinstruction.ru/img/bmw/21/127625.jpg)
- Manually adjust the headlight beam throw by turning the adjusting screw (1) beneath the fairing upper section with the aid of the headlight tester.
![](https://motoinstruction.ru/img/bmw/21/127626.jpg)
- Setting for headlight beam angle adjuster — -10 cm (-3.94 in) at a distance of 10 m (32.80 ft)
- Turned to left — onger throw/higher
- Turned to right — shorter throw/lower
- Adjust the suspension preload.
Lateral adjustment
![](https://motoinstruction.ru/img/bmw/21/127627.jpg)
- If necessary, laterally adjust the headlight beam angle by turning the adjusting screw (2) at the top left of the headlight with the aid of a cross-recessed screwdriver.