Reassembly water pump components (Ducati ST2)

0

Refit the water pump components on the left casing, positioning the seal ring (1) and the counterface (2) as shown in the diagram (see "Engine overhaul: Water pump").

Insert the lubricated rotor shaft from the outside of the casing and secure it with the circlip (3).

See this article in russian language

Article about repair motorcycles «Ducati ST series ST2» (1997-2003): «Reassembly water pump components»: https://motoinstruction.ru/en/Ducati/ST/ST2/engine/cooling/112167 <a href="https://motoinstruction.ru/en/Ducati/ST/ST2/engine/cooling/112167">Reassembly water pump components</a> - article about repair motorcycles «Ducati ST series ST2» (1997-2003) from section «Cooling and lube system». [url=https://motoinstruction.ru/en/Ducati/ST/ST2/engine/cooling/112167]Reassembly water pump components[/url] - article about repair motorcycles «Ducati ST series ST2» (1997-2003) from section «Cooling and lube system».