Symbols inside the diagram (Ducati ST2)

Symbols inside the diagram show the type of threadlocker, sealant or lubricants to be used at the points indicated. The table below shows the symbols together with the specifications for the threadlockers, sealants and lubricants to be used.

Symbol	Specifications	Abbreviation
	Engine oil (for specifications, see page 23)
	DOT 4 special hydraulic brake fluid
	SAE 80-90 gear oil or special products for chains with O-rings
	Anti-freeze (nitride, amine and phosphate free) 35+40% water solution
	Multipurpose, medium fibre, lithium grease	GREASE A
	Molybdenum disulphide grease, high mechanical stress and high temperature resistant	GREASE B
	Bearing/joint grease for parts subject to prolonged mechanical stress. Temperature range:-10 to 110°C/14 to 230°F.	GREASEC
	Low-strength threadlocker	LOCK 1
	Medium-strength threadlocker	LOCK 2
	High-strength thread sealant	LOCK 3
	Flange sealant. Resistant to high mechanical stress, solvents and high temperatures (up to 200°C/392°F). For pressures up to 350 Atm. Fills gaps up to 0.4 mm/0.015 in.	LOCK 4
	Permanent adhesive for smooth or threaded cylindrical fasteners on mechanical parts. High resistance to mechanical stresses and solvents. Temperature range: -55 to 175°C/-70 to 350°F.	LOCK 5
	Pipe sealant for pipes and medium to large fasteners. For water and gases (except oxygen) Maximum filling capacity: diameter gaps up to 0.40 mm/0.015 in.	LOCK 6
	Speed bonder for rubber and plastics. Elastomer loaded ethylic base.	LOCK 7
	High-strength retaining compound for threaded parts, bearings, bushes, splines and keys. Temperature range: -55 to 150°C/-70 to 302°F.	LOCK 8
	THREE BOND liquid gasket.
	Exhaust pipe paste. Self-curing sealant, hardens when heated. For temperatures over 1000°C.