Remove
Left
1. Remove left handlebar switch housing. See Left handlebar switch housing.
2. Remove left hand grip.
- a. Slice hand grip open with a sharp knife.
- b. Peel hand grip open.
- c. Remove from handlebar.
Right
1. See Throttle control for removal instructions.
Install
Left
1. Install left hand grip.
- a. Prepare the left grip end of the handlebar with emery cloth.
- b. Clean the left grip end of the handlebar with acetone.
- c. Apply LOCTITE 770 PRISM PRIMER to the inside of the new hand grip.
- d. Remove excess primer. Wait 2 minutes for the primer to set.
- e. Apply LOCTITE 411 PRISM INSTANT ADHESIVE to the inside of the new hand grip.
Note: LOCTITE 411 PRISM INSTANT ADHESIVE sets in 4 minutes and cures in 24 hours.
- f. Install the new hand grip with a twisting motion.
2. Install left handlebar switch housing. See Left handlebar switch housing.
Right
1. See Throttle control for installation instructions.