Remove
1. See Figure 3-44. Remove front belt guard.
- a. Remove screws (1).
- b. Remove front belt guard (2).
2. Remove screw (4) and bracket (3), if needed.
3. Disconnect negative battery cable. See Power disconnect.
4. See Figure 3-45. Remove upper belt guard.
- a. Remove upper belt guard screws (2).
- b. Remove upper belt guard (1).
5. Remove lower belt guard.
- a. Remove lower belt guard screws (3).
- b. Remove lower belt guard (4).
Install
| FASTENER | TORQUE VALUE | |
| Lower belt guard screw | 2.3-3.3 Nm | 21-29 in·lbs |
| Upper belt guard screw | 2.3-3.3 Nm | 21-29 in·lbs |
| Front belt guard bracket to engine screw | 10.0-12.0 Nm | 89-106 in·lbs |
| Front belt guard screw | 9.0-11.0 Nm | 80-97 in·lbs |
1. See Figure 3-45. Install lower belt guard.
- a. Install lower belt guard (4).
- b. Install lower belt guard screws (3). Tighten to 2.3-3.3 Nm (21-29 in·lbs).
2. Install upper belt guard.
- a. Install upper belt guard (1).
- b. Install upper belt guard screws (2). Tighten to 2.3-3.3 Nm (21-29 in·lbs).
3. Connect negative battery cable. See Power disconnect.
4. See Figure 3-44. Install front belt guard.
5. Install bracket, if removed.
- a. Position bracket (3).
- b. Install screw (4). Tighten to 10.0-12.0 Nm (89-106 in·lbs).
6. Install front belt guard (2).
- a. Install screws (1). Tighten to 9.0-11.0 Nm (80-97 in·lbs).
Figure 3-44. Front Belt Guard: 1. Screw (4); 2. Front belt guard; 3. Bracket; 4. Screw
Figure 3-45. Upper and Lower Belt Guards: 1. Upper belt guard; 2. Upper belt guard screw (3); 3. Lower belt guard screw (2); 4. Lower belt guard