Fastener torque values in this chapter
The table below lists torque values for all fasteners presented in this chapter.
| FASTENER | TORQUE VALUE | NOTES | |
| Clutch assembly nut | 160.0-170.0 Nm | 118-125 ft·lbs | Removing and installing clutch, Install |
| Clutch lifter plate screws | 8.0-10.0 Nm | 71-88 in·lbs | Removing and installing clutch, Install |
| Detent arm screw | 10.0-12.0 Nm | 89-106 in·lbs | Shifter shaft, Install |
| Detent collar screw | 5.0-7.0 Nm | 45-61 in·lbs | Shifter shaft, Install |
| Input shaft bearing retainer plate screws | 10.0-12.0 Nm | 89-106 in·lbs | Transmission right crankcase bearings, Install |
| Output pulley nut | 68.0-84.0 Nm | 51-62 ft·lbs | Output pulley, Install |
| Shift drum contact assembly screw | 5.0-7.0 Nm | 45-62 in·lbs | Drum and forks, Assemble |
| Shifter shaft lever screw | 9.0-11.0 Nm | 80-97 in·lbs | Shifter shaft, Install |