Check
1. On XL and XRV750-L to N (1990 to 1992) models, remove the fuel tank (see Chapter 4). On XRV750-P models onwards (1993-on) remove the left-hand side panel. On XL650V remove the left-hand heat shield (see illustration).
4.1. Remove the heat shield
2. Trace the wiring back from the coil(s), mounted in the clutch cover on the right-hand side of the engine on XL models and in Ihe alternator cover on the left-hand side on XRV models, to its wiring connector and disconnect it (see illustrations). Perform the following check(s).
4.2. Pulse generator coil wiring connector - XL600V
3. Using an ohmmeter check for continuity between each of the connector terminals on the coil side of the connector and earth.