Front
Push the caliper pistons all the way in by pushing the caliper body inward to provide clearance for the new pads.
![](https://motoinstruction.ru/img/honda/9/116423.jpg)
Always replace the brake pads in pairs to assure even disc pressure.
Remove the pad pin plug and loosen the pad pin .
![](https://motoinstruction.ru/img/honda/9/116424.jpg)
Remove the pad pin and brake pads.
Make sure the pad spring is installed in position.
Install new pads so their ends rest on the pad retainer on the bracket properly.
Install the pad pin by pushing the pads against the pad spring to align the pad pin holes in the pads and caliper.
![](https://motoinstruction.ru/img/honda/9/116425.jpg)
Tighten the pad pin.
Torque: 18 N·m (1.8 kgf·m, 13 lbf·ft).
Install the pad pin plug securely.
Operate the brake lever and pedal to seat the caliper pistons against the pads.
![](https://motoinstruction.ru/img/honda/9/116426.jpg)
Rear
Push the caliper pistons all the way in by pushing the caliper body inward to provide clearance for the new pads.
![](https://motoinstruction.ru/img/honda/9/116427.jpg)
Always replace the brake pads in pairs to assure even disc pressure.
Remove the pad pin plug and loosen the pad pin .
![](https://motoinstruction.ru/img/honda/9/116428.jpg)
Remove the pad pin and brake pads.
Make sure the pad spring is installed in position.
Install new pads so their ends rest on the pad retainer on the bracket properly.
Install the pad pin by pushing the pads against the pad spring to align the pad pin holes in the pads and caliper.
![](https://motoinstruction.ru/img/honda/9/116429.jpg)
Tighten the pad pin.
Torque: 18 N·m (1.8 kgf·m, 13 lbf·ft).
Install the pad pin plug securely.
Operate the brake pedal to seat the caliper pistons against the pads.
![](https://motoinstruction.ru/img/honda/9/116430.jpg)