Remove the pin boot and retainer from the bracket.
Remove the pin boot and pad spring from the caliper body.
![](https://motoinstruction.ru/img/honda/9/116453.jpg)
Remove the bolts and caliper body B.
![](https://motoinstruction.ru/img/honda/9/116454.jpg)
Place a shop towel over the pistons. Position the caliper body with the piston down and apply small squirts of air pressure to the fluid inlets to remove the pistons.
![](https://motoinstruction.ru/img/honda/9/116455.jpg)
Do not use high pressure air or bring the nozzle too close to the inlet.
Push the dust seals and piston seals in and lift them out.
![](https://motoinstruction.ru/img/honda/9/116456.jpg)
Clean the seal grooves, caliper pistons and caliper piston sliding surfaces with clean brake fluid.
Be careful not to damage the piston sliding surface.