Removal
Remove the left crankcase cover (page 16-11).
Remove the right crankcase cover (page 10-13).
Insert the gear holder between the primary driven gear and primary drive gear.
![](https://motoinstruction.ru/img/honda/9/116618.jpg)
Tool: Gear holder 07724-0010100 not available in USA.
Loosen the balancer weight bolt and remove the balancer weight.
Check the balancer weight for abnormal wear or damage.
![](https://motoinstruction.ru/img/honda/9/116619.jpg)
Installation
Install the balancer weight to the balancer shaft aligning the wide groove in the balancer weight with the wide teeth on the balancer shaft.
![](https://motoinstruction.ru/img/honda/9/116620.jpg)
Insert the gear holder between the primary driven gear and primary drive gear.
Tool: Gear holder 07724-0010100 not available in USA.
![](https://motoinstruction.ru/img/honda/9/116621.jpg)
Install and tighten the balancer weight bolt to the specified torque.
Torque: 98 N·m (10.0 kgf·m, 72 lbf·ft).
Install the right crankcase cover (page 10-14).
Install the left crankcase cover (page 16-11).
![](https://motoinstruction.ru/img/honda/9/116622.jpg)