Removal
Remove the exhaust system (page 2-3).
Drain the engine oil (page 3-12).
Remove the bolts and clutch cover.
Remove the bolts and timing cover.

Remove the rubber damper from the clutch cover.

Remove the bolts, ground cable and right crankcase cover.

Remove the dowel pins.

Installation
Clean the mating surfaces of the right crankcase cover and right crankcase.
Be careful not to damage the right crankcase and cover mating surfaces.
Apply sealant to the right crankcase cover mating surface.
Install the dowel pins to the right crankcase.

Install the right crankcase cover.
Install and tighten the bolts securely.

Install the rubber damper to the clutch cover aligning the grooves on the rubber damper with the tabs on the clutch cover.

Install the clutch cover bolts and timing cover bolts to their original locations.

Install the clutch cover and timing cover.
Install and tighten the bolts securely.
Fill the crankcase with the recommended engine oil (page 3-14).
Install the exhaust system (page 2-5).
