The brake light [A] should go on when the brake lever is applied or after the brake pedal is depressed about 10 mm (0.39 in.).
![](https://motoinstruction.ru/img/kawasaki/13/118573.jpg)
★ If it does not, adjust the brake light switch.
While holding the switch body, turn the adjusting nut [A] to adjust the switch.
![](https://motoinstruction.ru/img/kawasaki/13/118574.jpg)
Caution! To avoid damaging the electrical connections inside the switch, be sure that the switch body does not turn during adjustment.
★ If it does not go on, inspect or replace the following items:
- Battery (see Charging condition inspection in the Electrical System chapter)
- Brake Light (see Tail/Brake Light Removal/Installation in the Electrical System chapter)
- Main Fuse 30 A and Taillight Fuse 10 A (see Fuse inspection in the Electrical System chapter)
- Front Brake Light Switch [A] (see Switch inspection in the Electrical System chapter)
- Rear Brake Light Switch (see Switch inspection in the Electrical System chapter)
- Harness (see Wiring inspection in the Electrical System chapter)
![](https://motoinstruction.ru/img/kawasaki/13/118575.jpg)