Check that all chassis bolts and nuts are tightened to their specified torque. (Refer to page 2-29 for the locations of the following nuts and bolts on the motorcycle.)
ITEM | Nm | kgf·m | lb·ft | |
1 | Steering stem head nut | 90 | 9.0 | 65.0 |
2 | Steering stem locknut | 80 | 8.0 | 58.0 |
3 | Front fork upper clamp bolt | 23 | 2.3 | 16.5 |
4 | Front fork lower clamp bolt | 23 | 2.3 | 16.5 |
5 | Front axle | 100 | 10.0 | 72.5 |
6 | Front axle pinch bolt | 23 | 2.3 | 16.5 |
7 | Handlebar holder bolt | 23 | 2.3 | 16.5 |
8 | Handlebar holder set nut | 45 | 4.5 | 32.5 |
9 | Front brake master cylinder mounting bolt | 10 | 1.0 | 7.0 |
10 | Front brake caliper mounting bolt | 39 | 3.9 | 28.0 |
11 | Brake hose union bolt | 23 | 2.3 | 16.5 |
12 | Clutch master cylinder mounting bolt | 10 | 1.0 | 7.0 |
13 | Clutch hose union bolt | 23 | 2.3 | 16.5 |
14 | Air bleeder valve | 7.5 | 0.75 | 5.5 |
15 | Brake disc bolt (Front & Rear) | 23 | 2.3 | 16.5 |
16 | Rear brake caliper mounting bolt | 23 | 2.3 | 16.5 |
17 | Rear brake master cylinder mounting bolt | 10 | 1.0 | 7.0 |
18 | Rear brake master cylinder rod locknut | 18 | 1.8 | 13.0 |
19 | Front footrest bracket mounting bolt | 26 | 2.6 | 19.0 |
20 | Swingarm pivot nut | 100 | 10.0 | 72.5 |
21 | Swingarm pivot shaft locknut | 90 | 9.0 | 65.0 |
22 | Rear shock absorber mounting nut (Upper & Lower) | 50 | 5.0 | 36.0 |
23 | Cusion lever mounting nut | 78 | 7.8 | 56.5 |
24 | Cusion lever rod mounting nut | 78 | 7.8 | 56.5 |
25 | Rear axle nut | 100 | 10.0 | 72.5 |
26 | Seat rail bolt | 55 | 5.5 | 40.0 |