Air dam removal (Aprilia RS125/3)
- Main
- Aprilia
- RS-series
- RS 125 [3]
- Running gear and frame
- Frame and hinged elements
- Air dam removal
Torque wrench settings:
Release and remove the two side screws (1) on either side.
Release and remove the two screws (2).
Release and remove the two screws (3).
Remove the air dam.
- Screws (1-2-3): 3 Nm (0.3 Kgm)
Release and remove the two side screws (1) on either side.
Release and remove the two screws (2).
Release and remove the two screws (3).
Remove the air dam.
See this article in russian language
This article has been reviewed: Artemy Kuzmin
Link to this article in different formats
Comments and feedback from visitors
No comments yet, you will be the first!
- Information for owner
- Introduction to manual
- Maintenance
- Troubleshooting
- Engine and systems
- Engine repair
- Fuel system
- Cooling and lube system
- Running gear and frame
- Frame and hinged elements
- Front suspension and handlebar
- Rear suspension
- Brake system
- Wheels and tires
- Electric equipment
- Equipment and devices
- Starting and charging system