Front fairing removal (Aprilia RS125/3)
- Main
- Aprilia
- RS-series
- RS 125 [3]
- Running gear and frame
- Frame and hinged elements
- Front fairing removal
Torque wrench settings:
Repeat these three steps on either side:
Release and remove the two screws (1).
Remove the rearview mirror (2).
Release and remove the three screws on the side fairing (3).
Release and remove the screw (4).
Disconnect the headlight connector (5).
Remove front fairing and headlamp together.
- Screws (1-3): 3 Nm (0.3 Kgm)
Repeat these three steps on either side:
Release and remove the two screws (1).
Remove the rearview mirror (2).
Release and remove the three screws on the side fairing (3).
Release and remove the screw (4).
Disconnect the headlight connector (5).
Remove front fairing and headlamp together.
See this article in russian language
This article has been reviewed: Artemy Kuzmin
Similar articles about motorcycles of other brands
Removing and installing front fairing bracket BMW K 1200 LT (1998-2009)Removing the front fairing Ducati ST2 (1997-2003)
Exploded view — front fork Triumph Rocket III (2004-2018)
Front fork adjustment Yamaha FZ1 Fazer (2006-2015)
Headlight fairing Suzuki DRZ 250 (1996-2007)
Link to this article in different formats
Comments and feedback from visitors
No comments yet, you will be the first!
- Information for owner
- Introduction to manual
- Maintenance
- Troubleshooting
- Engine and systems
- Engine repair
- Fuel system
- Cooling and lube system
- Running gear and frame
- Frame and hinged elements
- Front suspension and handlebar
- Rear suspension
- Brake system
- Wheels and tires
- Electric equipment
- Equipment and devices
- Starting and charging system