Seat subframe cover removal (Aprilia RS125/3)
- Main
- Aprilia
- RS-series
- RS 125 [3]
- Running gear and frame
- Frame and hinged elements
- Seat subframe cover removal
Torque wrench settings:
Remove the seat; see 7.1.1.
Release and remove the two front screws (1).
Release and remove the two rear screws (2).
Release and remove the inner screw (3) and collect the nut.
Undo and remove the nut (4).
Remove the seat subframe cover.
- Front screws (1): 3 Nm (0.3 Kgm).
- Rear screws (2): 2 Nm (0.2 Kgm).
- Inner screw (3): 3 Nm (0.3 Kgm).
- Nut (4): 5 Nm (0.5 Kgm).
Remove the seat; see 7.1.1.
Release and remove the two front screws (1).
Release and remove the two rear screws (2).
Release and remove the inner screw (3) and collect the nut.
Undo and remove the nut (4).
Remove the seat subframe cover.
Note. If needed, repeat the process for the other seat subframe cover.
See this article in russian language
This article has been reviewed: Artemy Kuzmin
Similar articles about motorcycles of other brands
Seat cover — removal and installation Kawasaki ZX6R/ZX600J (2000-2002)Clip, Seat, Sport, Rear Frame Cover, Side Cowling Cover… Suzuki 1000A/XA V-Strom (2014-2019)
Removing the clutch cover Yamaha FZ1 Fazer (2006-2015)
Exploded view — cam cover Triumph Rocket III (2004-2018)
Seat — removal and installation Honda CB 400 SF (1992-1999)
Link to this article in different formats
Comments and feedback from visitors
No comments yet, you will be the first!
- Information for owner
- Introduction to manual
- Maintenance
- Troubleshooting
- Engine and systems
- Engine repair
- Fuel system
- Cooling and lube system
- Running gear and frame
- Frame and hinged elements
- Front suspension and handlebar
- Rear suspension
- Brake system
- Wheels and tires
- Electric equipment
- Equipment and devices
- Starting and charging system