- Screws (1): 5 Nm (0.5 kg·m)
- Screws (3): 3 Nm (0.3 kg·m)
Put the motorcycle on the stand.
Release and remove the three screws (1).
Note. The other three screws are there for aesthetic purposes only and can be left in place.
Open the filler cap (2).
Warning! Be careful when removing the screw (3). Take care not to drop it into the fuel tank.
Release and remove the screw (3).
Remove the filler cap (2) together with the flange (4).
Warning! Block off the filler opening to prevent the ingress of dirt.