Remove the fuel tank covers (Removal of the fuel tank fairings).
Remove the breather hose cover (Removal of the alternator-side crankcase cover).
Withdraw the breather hose (6) from the cover (A).
Withdraw the hose (6) upwards, leaving it attached to the tank breather and drain hose unions.
Working on the right-hand side of the motorcycle, disconnect the wiring connector (B) of the fuel level sensor from the main wiring harness, unscrew the screw (30) securing the side of the tank to the frame and recover the washer (31).
Remove the screw (13) and recover the washer (14).
Release the fuel hoses (18) and (19) from the clips (16).
Detach the lambda sensor cable (C) from the tank flange cover.
Warning! Before removing the flange cover (20), make sure the tank (1) is empty and position a rag to collect any spilt fuel.
Raise the tank, remove the flange cover (20) by unscrewing the nuts (21) and disconnect the quick-release fittings (29) from the flange.
