Disassembly gearbox (Ducati ST2)
- Main
- Ducati
- ST series
- ST2
- Engine and systems
- Transmission
- Disassembly gearbox
Pull out the fork guide rods.
Move the forks to disengage them from the selector drum slots.
Remove the gear selector forks.
Pull out the fork drum.
Remove the primary and secondary shafts complete with gears. Do not damage or lose the shims on the ends.
Pull out the inner ring (B) from the end part of the secondary shaft and insert it in the bearing on the right side crankcase half.
Move the forks to disengage them from the selector drum slots.
Remove the gear selector forks.
Pull out the fork drum.
Remove the primary and secondary shafts complete with gears. Do not damage or lose the shims on the ends.
Pull out the inner ring (B) from the end part of the secondary shaft and insert it in the bearing on the right side crankcase half.
See this article in russian language
This article has been reviewed: Evgeny Bogomolov
Similar articles about motorcycles of other brands
Gearbox specifications Harley-Davidson V-Rod (2002-2006)Changing oil in gearbox BMW R 1150 GS (1999-2004)
Adjusting the gearbox lever Aprilia RS 125/3 (1998-2005)
Link to this article in different formats
Comments and feedback from visitors
No comments yet, you will be the first!
- Information for owner
- Technical characteristics
- Maintenance
- Engine and systems
- Engine repair
- Fuel and exhaust system
- Fuel injection
- Cooling and lube system
- Transmission
- Running gear and frame
- Frame and hinged elements
- Wheels and tires
- Brake system
- Front suspension and handlebar
- Rear suspension
- Electric equipment
- Equipment and devices
- Starting and charging system