Inspection
Remove the seat (page 2-2).
Disconnect the ignition switch 4P connector.
![](https://motoinstruction.ru/img/honda/9/116656.jpg)
Check for continuity between the terminals.
Continuity should exist between the color coded wires as shown in chart.
![](https://motoinstruction.ru/img/honda/9/116657.jpg)
Removal/installation
Remove the seat (page 2-2).
Disconnect the ignition switch 4P connector.
![](https://motoinstruction.ru/img/honda/9/116658.jpg)
Remove the screw and ignition switch cover.
![](https://motoinstruction.ru/img/honda/9/116659.jpg)
Remove the bolts and ignition switch.
Installation is in the reverse order of removal.
Torque: 10 N·m (1.0 kgf·m, 7 lbf·ft).
![](https://motoinstruction.ru/img/honda/9/116660.jpg)