Removal
Remove the seat (page 2-2).
Remove the ECM (page 5-73).
Remove the screws and battery case cover.
With the ignition switch turned to "OFF", remove the terminal screw and disconnect the negative (-) cable first, then remove the terminal screw and disconnect the positive (+) cable.
Remove the battery from the battery case.
Installation
Installation is in the reverse order of removal.
Connect the positive (+) cable first, then connect the negative (-) cable.
After connecting the battery cables, coat the terminals with grease.
Set the positive (+) cable cover to the battery positive (+) terminal properly and do not expose the battery positive (+) terminal or cable.