- Right Side Cover (see Right side cover removal in the Frame chapter)
Disconnect the connector [A].
Disconnect the starter motor cable [B] and battery positive (+) cable [C] from the starter relay [D].
![](https://motoinstruction.ru/img/kawasaki/13/119555.jpg)
Caution! The battery positive (+) cable with the rubber cap is connected directly to the battery positive (+) terminal even when the ignition switch off, so take care not to short the removed cable to chassis ground.
Connect the hand tester [A] and 12 V battery [B] to the starter relay [C] as shown.
![](https://motoinstruction.ru/img/kawasaki/13/119556.jpg)
- Special Tool - Hand Tester: 57001-1394
★ If the relay does not work as specified, the relay is defective. Replace the relay.
Testing relay:
- Tester Range: x 1 Ω range
- Criteria:
- When battery is connected → 0 Ω
- When battery is disconnected → ∞ Ω