Overhaul free wheel and starter (Ducati ST2)

0

Check that the free wheel is working properly and that the roller tracks do not show any signs of wear or damage of any kind.

If the unit is not working properly, you can remove the circlip (2) and then extract the free wheel (1) from the flange.



When refitting the free wheel, follow the arrow which indicates the rotation direction of the engine.

Check that the gears which transmit the motion from the starter motor to the free wheel are in good condition.

Caution! When refitting the parts of the free wheel, only use engine oil and not grease which could affect the functioning of the free wheel.

See this article in russian language

Article about repair motorcycles «Ducati ST series ST2» (1997-2003): «Overhaul free wheel and starter»: https://motoinstruction.ru/en/Ducati/ST/ST2/engine/repair/112146 <a href="https://motoinstruction.ru/en/Ducati/ST/ST2/engine/repair/112146">Overhaul free wheel and starter</a> - article about repair motorcycles «Ducati ST series ST2» (1997-2003) from section «Engine repair». [url=https://motoinstruction.ru/en/Ducati/ST/ST2/engine/repair/112146]Overhaul free wheel and starter[/url] - article about repair motorcycles «Ducati ST series ST2» (1997-2003) from section «Engine repair».