![](https://motoinstruction.ru/img/kawasaki/5/113778.jpg)
Remove the seats (see Frame chapter).
Remove the junction box.
Pull off the connectors from the junction box.
Make sure all connector terminals are clean and tight, and none of them have been bent.
★ Clean the dirty terminals, and straighten slightly-bent terminals.
Check conductivity of the numbered terminals with the hand tester
★ If the tester does not read as specified, replace the junction box.
Fuse circuit inspection
Tester Connection | Tester Reading (Ω) | Tester Connection | Tester Reading (Ω) |
1-1A | 0 | 1A-8 | ∞ |
1-2 | 0 | 2-8 | ∞ |
ЗА-4 | 0 | ЗА-8 | ∞ |
6-5 | 0 | 6-2 | ∞ |
6-10 | 0 | 6-ЗА | ∞ |
6-7 | 0 | 17- ЗА | ∞ |
6-17 | 0 |