Loosen the both chain adjuster locknuts [С].
★ If the chain is too loose, turn out the left and right chain adjuster [D] evenly.
★ If the chain is too tight, turn in the left and right chain adjusters evenly, and kick the wheel forward.
Turn both chain adjusters evenly until the drive chain has the correct amount of slack. To keep the chain and wheel properly aligned, the notch [E] on the left wheel alignment indicator [F] should align with the same swingarm mark or position [G] that the right indicator notch aligns with,
Warning! Misalignment of the wheel will result in abnormal wear and j may result in an unsafe riding condition.
Tighten both chain adjuster locknuts securely.
Tighten the axle nut.
Torque - Rear Axle Nut: 125 N·m (13.0 kg·m, 92 ft·lb)
Turn the wheel, measure the chain slack again at the tightest position, and readjust if necessary.
Insert a new cotter pin and spread its ends.