Attention! Make sure that the location and location in the assembled assembly of each removed part is determined. Arrange the parts into groups «Presenters», «Slaves», so that when assembling the unit, install each in its place.
Check the gap in the groove on the gear with a feeler gauge. The amount of clearance on all three forks plays an important role in the smoothness and reliability of gear shifting.
![](https://motoinstruction.ru/img/suzuki/4/112583.jpg)
Checking the gap
Shift Fork - Groove Clearance
Acceptable limit: 0.50 mm
If the groove clearance exceeds the specified limit, replace the yoke or pinion or both.
![](https://motoinstruction.ru/img/suzuki/4/112584.jpg)
Groove check
09900-20803: Dipstick
09900-20102: Vernier caliper
Groove width. Norm (No. 1, 2 and 3): 5.0–5.1 mm
![](https://motoinstruction.ru/img/suzuki/4/112585.jpg)
Checking the thickness