Unscrew and remove the six screws by loosening them 1/4 of a turn at a time; operate in stages and diagonally, and retrieve the washers and the clutch springs.
Remove the thrust plate.
Remove the mushroom head clutch control rod.
Remove the discs.
Remove the shim and the cup spring.
Fasten the clutch housing using the specific tool.
Specific tooling: 9100896 Clutch bell locking tool
Undo and remove the clutch hub nut, retrieving the washer.
Remove the clutch hub.
Retrieve the special washer between the clutch hub and the clutch housing.
Collect the clutch bell.
Collect the spacer and the needle bearings.
Collect the shim washer.
See also specifications for this operation.