Checking the clutch plates (Aprilia Shiver 750)

0

Lay the friction discs and steel discs on a level surface and check them for cracks and potential distortions.

Maximum distortion allowed: 0.20 mm (0.0079 in)



Measure the driving plate thickness at four positions, replace them all if not complying with specifications.

Caution! The steel discs must show no scores or tempering colour.

Measure the thickness of the clutch discs at four positions, replace them if not complying with specifications.

• Thickness of nine drive discs: 2.5 mm (0.10 in).
• Driven disc thickness: 2.95-3.05 mm (0.116-0.120 in)

Mushroom valve check

Check if the valve slides freely, without jamming.

Blow compressed air into the valve and check that the lubricating oil passage holes open.

See this article in russian language

Checking the clutch friction plates Yamaha FZ1 Fazer (2006-2015)
Checking clutch operating fluid level BMW R 1150 GS (1999-2004)
Checking the clutch lever sensor Honda CB 400 SF (1992-1999)
Checking clutch fluid level Harley-Davidson V-Rod (2002-2006)
Checking the brake and clutch fluid levels Ducati Monster 696 (2007-2014)

Article about repair motorcycles «Aprilia Shiver SL 750» (2007-2016): «Checking the clutch plates»: https://motoinstruction.ru/en/Aprilia/Shiver/SL750/engine/transm/114591 <a href="https://motoinstruction.ru/en/Aprilia/Shiver/SL750/engine/transm/114591">Checking the clutch plates</a> - article about repair motorcycles «Aprilia Shiver SL 750» (2007-2016) from section «Transmission». [url=https://motoinstruction.ru/en/Aprilia/Shiver/SL750/engine/transm/114591]Checking the clutch plates[/url] - article about repair motorcycles «Aprilia Shiver SL 750» (2007-2016) from section «Transmission».