Removing the clutch cover (Aprilia Shiver 750)

0

Undo and remove the perimeter fastener screws.



Remove the clutch cover.

Removing the clutch cover alone is only recommended when replacing the clutch plates. When removing the entire clutch assembly, removing the clutch side crankcase is recommended.



However, removing the entire clutch assembly is possible by removing the clutch cover alone. In this case, proceed as follows:

• measure the projection of the clutch housing from the crankcase before disassembling;
• when refitting, check that the projection has not changed before tightening the clutch nut. If the projection has changed, rotate the crankshaft to correctly engage the engine oil pump drive gear on the clutch housing with the oil pump driven gear.

See also specifications for this operation.

[Information copied from the resource motoinstruction.ru]

See this article in russian language

Removing the clutch cover Yamaha FZ1 Fazer (2006-2015)
Removing the gear change lever, the sprocket cover and the… Ducati ST2 (1997-2003)
Clutch cover Suzuki V-Strom DL-1000K2/K9 (2002-2012)
Exploded view — clutch cover Triumph Rocket III (2004-2018)
Removing cylinder head cover BMW R 1150 GS (1999-2004)

Article about repair motorcycles «Aprilia Shiver SL 750» (2007-2016): «Removing the clutch cover»: https://motoinstruction.ru/en/Aprilia/Shiver/SL750/engine/transm/114589 <a href="https://motoinstruction.ru/en/Aprilia/Shiver/SL750/engine/transm/114589">Removing the clutch cover</a> - article about repair motorcycles «Aprilia Shiver SL 750» (2007-2016) from section «Transmission». [url=https://motoinstruction.ru/en/Aprilia/Shiver/SL750/engine/transm/114589]Removing the clutch cover[/url] - article about repair motorcycles «Aprilia Shiver SL 750» (2007-2016) from section «Transmission».