To change the oil:
Caution!
- Hot oil is more fluid and will drain out more easily and completely; ideal temperature is reached after the engine has run for about twenty minutes.
- Oil becomes very hot when the engine is hot; be careful not to get burned when carrying out the operations described below.
Use a cloth to wipe off any mud deposit on the area next to the filler plug (1).
Place a container with + 4000 cm³ (244 cu.in) capacity under the drainage plug (2).
Unscrew and remove the drainage plug (2).
Unscrew and remove the filler plug (1).
Drain the oil into the container; allow several minutes for oil to drain out completely.
Replace the sealing washer of the drainage plug (2).
Remove any metal scrap attached to the drainage plug (2) magnet.
Screw and tighten the drainage plug (2).
Locking torques ( N·m):
- Oil drainage plug - M16x1.5 19 Nm (14.01 lbf ft)
Replace the oil filter.
Fill up to the right engine oil level by adding recommended engine oil.