- Open the side case.
Note: Note positions of retaining plates (4, 5).
- Remove retaining plates (4, 5).
Warning: The strap roller is spring-loaded: risk of injury if metal fastener (2) is suddenly released.
- Remove screw (1) securing strap to flap of side case.
- Remove cover plate (3).
- Remove handle complete with lock.
- Insert key and turn to OPEN position.
- Insert a length of wire or similar (arrow) and press in the locking pin.
- Use the ignition key to remove lock barrel.
- Installation is the reverse of the removal procedure: pay particular attention to the following.
- Prior to installation, grease the lock barrel with Retinax EP2.