BMW Inspection at 1000 km (600 miles) | BMW Service every 10000 km (6000 miles) | BMW Inspection every 20000 km (12000 miles) | BMW Annual Service | |
Read the fault code memory with the MoDiTeC | X | X | X | X |
Change oil while at regular operating temperature and renew the oil filter element if motorcycle is used only for short journeys or at outside temperatures under 0°C (32°F), every 3 months, but at least every 3000 km (1800 miles) *) | X | X | X | X |
Change oil in gearbox while at operating temperature at least every 2 years*) | X | X every 2 years | ||
Change oil in rear wheel drive while at regular operating temperature; if necessary, clean inductive sensor on rear wheel every 40000 km (24000 miles) or at least every 2 years *) | X | X 40000 (24000) | X every 2 years | |
Renew fuel filter *) normally every 40000 km (24000 miles), if fuel quality is poor every 20000 km (12000 miles) | X 40000 (24000) | |||
Check battery acid level, if necessary add distilled water Clean and grease the battery terminals, if necessary | X | X | ||
Renew intake air filter element in very dusty or dirty operating conditions, renew the intake air filter element every 10000 km (6000 miles) or even more often if necessary *) | X | |||
Renew Poly-V belt *) renew Poly-V belt every 60000 km (36000 miles); do not adjust | X 60000 (36000) | |||
Check brake fluid level at front and rear | X | X | ||
Check operation of brake system and freedom from leaks; repair/replace items if nec. *) | X | |||
Examine brake pads and discs for wear, renew if necessary *) | X | X | ||
Change the brake fluid annually | X | |||
Check clutch fluid level | X | X | ||
Change the clutch fluid at least every 2 years *) | X every 2 years | |||
Check tightness of rear wheel studs | X | |||
Check rear wheel bearing play by tilting wheel | X | |||
Check swinging arm bearings (zero play); adjust if necessary *) | X | X | ||
Grease the side stand pivot | X | X | X | |
Check function of side stand contact switch | X | X | X | X |
Check condition of spark plugs | X | |||
Renew spark plugs | X | |||
Check security of cylinder head nuts | X | |||
Check/adjust valve clearances | X | X | X | |
Check throttle cable for free movement, abrasion and kinking; renew if necessary *) Check cable play Check synchronisation and eliminate leaks *) | X | X | X | |
Final inspection with road safety and functional check: – Condition of tyres and wheels, rims and spokes if applicable, tyre pressures – Lights and signalling equipment – Telltale and warning lights – Clutch, gear shift – Front and rear brakes, steering – Instruments – If necessary, test ride | X | X | X | X |
*) charged as an additional item