| Item | Desired value | Unit of measurement/ specification |
| Oil capacities | ||
| Engine (with filter) | 3.75 (6.60) | litres (Imp.pints) |
| Engine (without filter) | 3.50 (6.16) | litres (Imp.pints) |
| [SI 11 048 90] Engine oil grade: brand-name HD oil for four-stroke spark-ignition engines, API classes SE, SF, SG; combination with CC or CD specification | ||
| Gearbox: Initial filling/oil changes | approx. 1.0 (1.76) up to lower edge of filler hole | litres (Imp.pints) Brand-name hypoid gear oil, SAE class GL 5 SAE 90 |
| Rear wheel drive Initial filling/oil changes | approx. 0.25 (0.44) oil level with bottom of filler neck | litres (Imp.pints) Brand-name hypoid gear oil, SAE class GL 5 SAE 90 |
| Valve clearances | ||
| Measured cold (max. 35°C/95°F) | Inlet: 0.15 (0.006) | mm (in) |
| Exhaust: 0.30 (0.011) | mm (in) | |
| Ignition timing | ||
| Static setting | adjust at TDC | |
| Spark plugs | ||
| Electrode gap | 0.8 (0.03) | mm (in) |
| Wear limit | 1.0 (0.04) | mm (in) |
| Idle speed | 1100±50 | min⁻¹ |
| Throttle cable setting | ||
| for cold-start (increased idle) speed | zero play | |
| for throttle (twistgrip) cable | app. 0.5 (0.02) | mm (in) free travel |
| for divider cable | zero play | |
| Brakes | DOT 4 brake fluid | |
| Minimum front pad thickness | 1.0 (0.04) | mm (in) |
| Minimum rear pad thickness | wear mark | |
| Minimum front disc thickness | 4.5 (0.18) | mm (in) |
| Minimum rear disc thickness | 4.5 (0.18) | mm (in) |
| Tyre pressures depending on load | front: 2.2 - 2.5 (31.3 - 35.6) | bar (psi) |
| rear: 2.5-2.9 (35.6-41.2) | bar (psi) | |
| Tightening torques: | ||
| Oil filter | 11 | Nm |
| Engine oil drain plug | 32 | Nm |
| Gearbox oil filler plug | 30 | Nm |
| Gearbox oil drain plug | 30 | Nm |
| Rear wheel drive oil filler/drain plug | 23 | Nm |
| Fuel tank to rear frame | 21 | Nm |
| Fuel pump unit to tank | 6 | Nm |
| Poly-V belt preload | 8 | Nm |
| Alternator to alternator carrier cover | 20 | Nm |
| Brake calliper mounting, front/rear | 40 | Nm |
| Rear wheel studs | initial torque 72 | Nm |
| 105 | Nm | |
| Tightening cylinder heads: Nut | slacken/20 | Nm |
| 180 | ° tightening angle | |
| M10 screw | slacken/40 | Nm |
| Locknut, valve adjusting screw | 8 | Nm |
| Cylinder head cover | 8 | Nm |
| Spark plugs | 20 | Nm |
Service data of motorcycle (BMW R1150GS)
See this article in russian language
Similar articles about motorcycles of other brands
Suzuki DRZ 250 (1996-2007): Service data for motorcycle DR-Z250K1 (2002)
Aprilia RS 125/3 (1998-2005): Technical data of motorcycle
Harley-Davidson V-Rod (2002-2006): Storing the motorcycle and keeping it at the dealer's service center
Triumph Tiger 800 (2010-2019): Service Data
Ducati Monster 696 (2007-2014): Motorcycle technical data
Yamaha FZ1 Fazer (2006-2015): Description of motorcycle elements
Honda CB 400 SF (1992-1999): Main dimensions and technical parameters of the motorcycle
Kawasaki ZX6R/ZX600J (2000-2002): Before servicing of motorcycle
Link to this article in different formats
TEXTHTMLBB Code
Comments and feedback from visitors
No comments yet, you will be the first!
- Information for owner
- Introduction to manual
- Maintenance
- Engine and systems
- Engine repair
- Fuel and exhaust systems
- Transmission
- Running gear and frame
- Frame and hinged elements
- Front suspension and handlebar
- Rear wheel drive
- Wheels and tires
- Brake system
- Electric equipment
- Equipment and devices
- Starting and charging system