Removing the full fairing (Ducati ST2)

0

Remove the side panels and the front fairing as described above and then proceed as follows:

Unscrew the screw (D) fixing the fairing sections to the left-hand side frame and the expansion tank on the right-hand side.



Unscrew the rear fixing screws (E) holding the fairing sections to the frame brackets.

Unscrew the rear fixing screws (F) holding the fairing sections to the frame stud bolts.



Unscrew the 2 lower screws (B) holding the fairing halves to each other.

Unscrew the 2 screws (C) fixing the lower fairing halves to the front air scoop.



Remove the lower fairing halves.

See this article in russian language

Article about repair motorcycles «Ducati ST series ST2» (1997-2003): «Removing the full fairing»: https://motoinstruction.ru/en/Ducati/ST/ST2/chassis/frame/112067 <a href="https://motoinstruction.ru/en/Ducati/ST/ST2/chassis/frame/112067">Removing the full fairing</a> - article about repair motorcycles «Ducati ST series ST2» (1997-2003) from section «Frame and hinged elements». [url=https://motoinstruction.ru/en/Ducati/ST/ST2/chassis/frame/112067]Removing the full fairing[/url] - article about repair motorcycles «Ducati ST series ST2» (1997-2003) from section «Frame and hinged elements».