Disconnecting the righthand side electrical connections (Ducati ST2)
- Main
- Ducati
- ST series
- ST2
- Electric equipment
- Equipment and devices
- Disconnecting the righthand si…
Unscrew the clamp screw and disconnect the earth cable (5) from the engine.
At reassembly, spread a coating of grease for electrical contacts on the earth cable fitting.
Remove the cable tie (A) and disconnect the neutral indicator light (6) connections from the main cable.
Remove the protective cap (B) and disconnect the push-on connector of the main cable from the pressure switch.
At reassembly ensure that the protective cap is correctly fitted to the thermostat. The air inside the cap is vital to the perfect operation of the thermostat and compensates for the pressure differences to which this component is subject.
(The original text is on the website: MotoInstruction.ru)
Ducati Spare Parts Service provides two spares kits for this component. Kit 1 consists of a complete thermostat with protective cover and push-on connector (see fig. A). Kit 2 consists of a protective cover and push-on connector (fig. B).
fig. A
fig. B
fig. C
At reassembly, spread a coating of grease for electrical contacts on the earth cable fitting.
Remove the cable tie (A) and disconnect the neutral indicator light (6) connections from the main cable.
Remove the protective cap (B) and disconnect the push-on connector of the main cable from the pressure switch.
At reassembly ensure that the protective cap is correctly fitted to the thermostat. The air inside the cap is vital to the perfect operation of the thermostat and compensates for the pressure differences to which this component is subject.
(The original text is on the website: MotoInstruction.ru)
Caution! Change damaged caps. Damage to the cap will cause oxidation of the contacts and lead to operating faults.
Ducati Spare Parts Service provides two spares kits for this component. Kit 1 consists of a complete thermostat with protective cover and push-on connector (see fig. A). Kit 2 consists of a protective cover and push-on connector (fig. B).
fig. A
fig. B
fig. C
See this article in russian language
This article has been reviewed: Evgeny Bogomolov
Similar articles about motorcycles of other brands
Electrical components — front side Aprilia SL 750 Shiver (2007-2016)Electrical precautions — inspection Triumph Rocket III (2004-2018)
Side stop Yamaha FZ1 Fazer (2006-2015)
Location of electrical components Suzuki DRZ 250 (1996-2007)
Threaded connections — checking Honda CB 400 SF (1992-1999)
Link to this article in different formats
TEXTHTMLBB Code
Comments and feedback from visitors
No comments yet, you will be the first!
- Information for owner
- Technical characteristics
- Maintenance
- Engine and systems
- Engine repair
- Fuel and exhaust system
- Fuel injection
- Cooling and lube system
- Transmission
- Running gear and frame
- Frame and hinged elements
- Wheels and tires
- Brake system
- Front suspension and handlebar
- Rear suspension
- Electric equipment
- Equipment and devices
- Starting and charging system