2. Tighten the oil pump drive sprocket bolt to 15 Nm.
3. Before installing the oil intake and pressure reducing valve, lubricate the rubber o-rings with engine oil.
4. Install a new oil pan gasket, having previously lubricated both sides with engine oil.
5. We wrap the bolts of the pallet until they stop, without tightening them.
6. We tighten the bolts of the oil pan in several stages in the sequence indicated in the photo.
![](https://motoinstruction.ru/img/honda/1/110092.jpg)
7. Reinstall the clutch basket (if she filmed) and right engine cover.
8. Fill the engine with oil (see «Changing engine oil and oil filter»).