Removal
Remove the bolt and the reservoir cover.
Drain the brake fluid from the hydraulic system (page 15-4).
![](https://motoinstruction.ru/img/honda/9/116485.jpg)
Remove the bolt and rear master cylinder reservoir cover.
Disconnect the reservoir hose from the reservoir.
![](https://motoinstruction.ru/img/honda/9/116486.jpg)
Installation
Connect the reservoir hose to the reservoir.
Install the reservoir onto the frame and tighten the mounting bolt.
Fill and bleed the hydraulic system (page 15-7).
Install the reservoir cover and tighten the mounting bolt to the specified torque.
Torque: 12 N·m (1.2 kgf·m, 9 lbf·ft).
![](https://motoinstruction.ru/img/honda/9/116487.jpg)