Make sure the cam chain guide bosses are in the grooves of the cylinder.
![](https://motoinstruction.ru/img/honda/9/115873.jpg)
Install the dowel pins and new gasket.
![](https://motoinstruction.ru/img/honda/9/115874.jpg)
The cylinder head has the following identification mark:
- "F": Front cylinder
- "R": Rear cylinder
![](https://motoinstruction.ru/img/honda/9/115875.jpg)
Install the cylinder head onto the cylinder.
Apply engine oil to the threads and seating surfaces of the cylinder head mounting nuts.
Install the washer and cylinder head mounting nuts.
Tighten the cylinder head mounting nuts to the specified torque.
Torque:
- 10 mm: 49 N·m (5.0 kgf·m, 39 lbf·ft)
- 8 mm: 26 N·m (2.7 kgf·m, 20 lbf·ft)
![](https://motoinstruction.ru/img/honda/9/115876.jpg)
Install the cam chain tensioner into the cylinder head.
![](https://motoinstruction.ru/img/honda/9/115877.jpg)
Install the cam chain tensioner bolts with new washers.
Tighten the bolts to the specified torque.
Torque: 12 N·m (1.2 kgf·m, 9 lbf·ft).
![](https://motoinstruction.ru/img/honda/9/115878.jpg)