- Fuel Tank (see Fuel tank removal in the Fuel System chapter)
- Spark Plug Caps [A]
![](https://motoinstruction.ru/img/kawasaki/13/118658.jpg)
Remove the spark plug using the 16 mm (0.63 in.) plug wrench vertically.
- Special Tool - Spark Plug Wrench, Hex16: 57001-1262.
Caution! The insulator [A] of the spark plug may break if when the wrench is inclined during loosening.
- Inclined Spark Plug Wrench [B]
- Contact (Spark Plug and Plug Wrench) [C]
- Bad [D]
- Vertically Spark Plug Wrench [E]
- Good [F]
![](https://motoinstruction.ru/img/kawasaki/13/118659.jpg)
Replace the spark plug with a new one.
Standard spark plug:
- Type: NGK CPR7EA
Insert new spark plug in the plug hole, and finger-tighten it first.
Using the plug wrench [A] vertically, tighten the plug.
![](https://motoinstruction.ru/img/kawasaki/13/118660.jpg)
Caution! The insulator of the spark plug may break if when the wrench is inclined during tightening.
- Special Tool - Spark Plug Wrench, Hex16: 57001-1262.
- Torque - Spark Plugs: 18 N·m (1.8 kgf·m, 13 ft·lb).
Install the spark plug caps securely.
Be sure the spark plug caps are installed by pulling up it lightly.