Remove: Thermostat Bracket [A] (see Thermostat removal in the Cooling System chapter).
![](https://motoinstruction.ru/img/kawasaki/13/118632.jpg)
Loosen the radiator hose clamps and remove the hoses [B].
Unscrew the bolts and remove the water hose fittings [C] and O-rings [D].
Apply sorp and water solution to the new O-ring and install the water hose fittings.
Torque the water hose fitting bolts [E].
Torque - Water Hose Fitting Bolts: 9.8 Nw (1.0 kgf·m 87 in·lb).
Install the new radiator hose and tighten the hose clamps.
Torque:
- Radiator Hose Clamp Screw: 2.0 N·m (2.0 kgf·m 18 in·lb)
- Thermostat Housing Cover Bracket Bolt: 6.9 N·m (0.70 kgf·m 61 in·lb)
Fill the coolant (see Coolant change).
Check the cooling system for leaks.