Remove any imbedded stones or other foreign particles from the tread.
Visually inspect the tire for cracks and cuts, replacing the tire in case of damage. Swelling or high spots indicate internal damage, requiring tire replacement.
Measure the tread depth at the center of the tread with a depth gauge [A], Since the tire may wear unevenly, take measurement at several places.
![](https://motoinstruction.ru/img/kawasaki/5/113493.jpg)
If any measurement is less than the service limit, replace the tire.
Tread depth
Front: | Standard: | 4.0 mm (DUNLOP) 3.8 mm (MICHELIN) |
Service Limit: | 1 mm, (FG) 1.6 mm | |
Rear: | Standard: | 5.4 mm (DUNLOP) 5.6 mm (MICHELIN) |
Service Limit: | 2 mm (Up to 130 km/h) 3 mm (Over 130 km/h) |
Warning! To ensure safe handling and stability, use only the recommended standard tires for replacement, inflated to the standard pressure.
Note.
- Most countries may have their own regulations a minimum tire tread depth: be sure to follow them.
- Check and balance the wheel when a tire is replaced with a new one.