Disconnect the 2-pin connector [A] in the fan motor leads.
Using two auxiliary wires, supply battery [B] power to the fan motor.
If the fan does not rotate, the fan motor is defective and must be replaced.
Radiator fan motor — inspection (Kawasaki ZX-6R/ZX-600-J)
Remove the left lower fairing (see Frame chapter).
Disconnect the 2-pin connector [A] in the fan motor leads.
Using two auxiliary wires, supply battery [B] power to the fan motor.
If the fan does not rotate, the fan motor is defective and must be replaced.
Disconnect the 2-pin connector [A] in the fan motor leads.
Using two auxiliary wires, supply battery [B] power to the fan motor.
If the fan does not rotate, the fan motor is defective and must be replaced.
See this article in russian language
Similar articles about motorcycles of other brands
Suzuki 1000A/XA V-Strom (2014-2019): Radiator/Cooling Fan Motor Removal and Installation*
Yamaha FZ1 Fazer (2006-2015): Checking the radiator fan motor
Honda CB 400 SF (1992-1999): Radiator of the cooling system — removal and installation
Triumph Rocket III (2004-2018): Idle speed control stepper motor — removal and installation
Harley-Davidson V-Rod (2002-2006): Switch that turns on the motor
BMW R 1150 GS (1999-2004): Removing and installing starter motor
Ducati ST2 (1997-2003): Starter motor — general information
Aprilia RS 125/3 (1998-2005): Radiator — removal and installation
Link to this article in different formats
TEXTHTMLBB Code
Comments and feedback from visitors
No comments yet, you will be the first!
- Information for owner
- Introduction to manual
- Troubleshooting
- Engine and systems
- Engine repair
- Fuel system
- Carburetor repair
- Cooling system
- Lube system
- Transmission
- Running gear and frame
- Frame and hinged elements
- Wheels and tires
- Brake system
- Front suspension and handlebar
- Rear suspension
- Electric equipment
- Equipment and devices
- Starting and charging system
- Ignition system
- Electrical circuits