![](https://motoinstruction.ru/img/suzuki/4/112838.jpg)
Wheel bearings
Apply SUZUKI SUPER GREASE "A" grease to the wheel bearings.
For USA: 99000-25030: SUZUKI SUPER GREASE "A"
For other countries: 99000-25010: SUZUKI SUPER GREASE "A"
Install the bearing using the special tool.
09941-34513: Special tools
![](https://motoinstruction.ru/img/suzuki/4/112839.jpg)
Attention! Install the right bearing first, then the left.
The closed side of the bearing should face the outside of the wheel (section 5-23).
Rear brake disc
Make sure the brake disc is clean and free of grease. Apply THREAD LOCK SUPER "1360" threadlocker to the bolt threads and tighten the bolt to the appropriate torque.
![](https://motoinstruction.ru/img/suzuki/4/112840.jpg)
99000-32130: THREAD LOCK SUPER "1360"
Brake disc mounting bolt: 23 Nm (2.3 kgf-m)
Rear sprocket
Tighten the rear sprocket bolts to the appropriate torque.
![](https://motoinstruction.ru/img/suzuki/4/112841.jpg)
Rear sprocket bolt: 23 Nm (2.3 kgf-m)
Note. The stamped mark A on the rear sprocket should face the outside of the wheel.
Rear wheel hubs
Install the rear wheel bushings.
Long sleeve (1): from the sprocket side.
Short sleeve (2): from the brake disc side.
![](https://motoinstruction.ru/img/suzuki/4/112842.jpg)
Rear wheel
Adjust the chain slack after installing the rear axle (section 2-14).
Tighten the rear axle nut to the appropriate torque.
![](https://motoinstruction.ru/img/suzuki/4/112843.jpg)
Rear axle nut: 110 Nm (11.0 Kgs-m)
Note.
- After tightening the rear axle nut, install a new cotter pin.
- After installing the rear wheel, press the brake pedal several times to check the brake functionality.