- Install the new gaskets (2, 3) to each cylinder head cover.
- Apply SUZUKI BOND "1207B" to the cam end caps of the gaskets as shown.
99104-31140: SUZUKI BOND "1207B"
Caution: Use the new gaskets to prevent oil leakage.
- Place the cylinder head covers on each cylinder head.
- Fit the gaskets to each head cover bolt.
Caution: Use the new gaskets to prevent oil leakage.
- After applying engine oil to the gaskets, tighten the head cover bolts to the specified torque.
Head cover bolt: 14 Nm (1.4 kgf·m, 10.0 lb·ft)