Key to wiring circuit diagram
| Key | item Description |
| 1 | Engine Control Module |
| 2 | Diagnostic Connector |
| 3 | Vehicle Speed Sensor |
| 4 | Sidestand Switch |
| 5 | instrument Assembly |
| 6 | Accessory Fuel Gauge |
| 7 | Gear Position Sensor |
| 8 | Clutch Switch |
| 9 | Starter Relay |
| 10 | Fall Detection Sensor |
| 11 | Air Pressure Sensor |
| 12 | MAP Sensor |
| 13 | Inlet Air Temperature Sensor |
| 14 | Lambda Sensor |
| 15 | Cooling Fan |
| 16 | Fuel Pump and Level Sender Assembly |
| 17 | Fuel Pump Relay |
| 18 | Cooling Fan Relay |
| 19 | Fuse Box (Fuse 7) |
| 20 | Ignition Coils |
| 21 | Evaporative Purge Valve |
| 22 | Throttle Position Sensor |
| 23 | Second Throttle Position Sensor |
| 24 | Inlet Air Temperature Sensor |
| 25 | Idle Speed Control Stepper Motor |
| 26 | Second Throttle Actuator |
| 27 | Fuel Injectors |
| 28 | Engine Harness Connector |
| 29 | Engine Management System Relay |
| 30 | Crankshaft Sensor |
Key to wiring colour codes
| Code | Wiring Colour |
| B | Black |
| U | Blue |
| N | Brown |
| G | Green |
| S | Slate/Grey |
| 0 | Orange |
| K | Pink |
| R | Red |
| P | Purple |
| W | White |
| Y | Yellow |
| LG | Light Green |
| LU | Light Blue |
ECM connector pin numbering
The above illustration shows the pin numbering system used in the engine management circuit diagram.
The small connector's pins are prefixed A and the large connector's pins B. As viewed on the mating face with the ECM (as per the illustration), pins are numbered from right to left with number one in the top right corner.
