Warning! Motorcycle operation with insufficient, deteriorated, or contaminated engine oil will cause accelerated engine wear and may result in engine or transmission seizure. Seizure of the engine or transmission may lead to sudden loss of control and an accident.
1. Oil tank; 2. Oil tank cap; 3. Dipstick; 4. Maximum mark; 5. Minimum mark
Caution! Ensure no foreign matter or contamination enters the oil tank during an oil change or top-up. Contamination entering the oil tank may lead to engine damage.
1. Allow the engine to idle for one minute, then stop the engine.
2. Remove the filler cap/dipstick from the oil tank, wipe the dipstick clean and refit the filler cap, pushing it fully home.
Note: The actual level is indicated when the motorcycle is upright, (not on the side stand) and when the filler cap/dipstick has been pushed fully home.
3. Remove the filler cap/dipstick.
4. The maximum oil level is indicated by marks on the filler cap/dipstick. When the oil level is correct, the indicated oil level must be between the maximum and minimum lines on the dipstick.
5. If the oil level is too low, add oil a little at a time until the correct level is reached.
6. Once the correct level is reached, fit the filler cap/ dipstick,